返回产品首页

耐候色母粒

  Weatherproofing Colour Master Batch

一、应用及特点：

该系列产品（ABS、HIPS、PP、PE等）采用进口光稳定剂和抗氧剂，经科学配制，充分利用助剂的“协同效应”，可使制品在风吹、雨淋、日晒等恶劣条件下使用而无后顾之忧。使用该耐候色母粒的制品，在经3500小时人工加速老化后，主要力学性能保持率仍在90%以上。广泛应用于空调室外机罩壳、汽车仪表板、方向盘、内饰件及其它室外用塑料制品等领域。

二、主要技术指标：

三、推荐配比：

    1：20，1：25（根据要求不同而定）

四、使用方法：按规定配比与本白料混合均匀烘干后即可使用。

Weatherproofing Colour Master Batch

1.Application and Features:

This series products (ABS , HIPS ,PP ,PE ,etc)employ import light stabilizer and antioxidant .After scientific make-up ,it fully takes the products be used under adverse conditions such as wind-blew ,rain-drenched or sun-scorched without fear of disturbance in the rear .For the use of this weatherproofing  colour master batch , after 35 hundred  hoursˊartificial accelerated aging ,its main mechanics performance preservation rate still remains above90% .It is widely applied in outdoor air-conditioner housing can ,auto dashboard steering wheel ,inner ornaments etc.

2.Main Technical Index:

3.Recommended Mixture Proportion:

Decided according to different requirements .(1:20,1:25)

4.Use Method :Mixture proportion as per stipulation ,evenly mixed with resin ,then dry it off for immediate use.